 |
THERE ARE MANY OTHER OWN PRODUCTS HERE.THIS LINK CONTAIN 4 PAGES
Description:Kar-Bar is Barium sulfate (BaSO4) powder. It is an inert material which fully conforms to either API standard 13A and/or OCMA specification DFCP-3.It has 4.2 g/cm3 density. Application:Barite is used for the weighting of any water, oil or invert drilling fluid systems. Recommended Treatment: Barite is a very pure grade barium sulfate and thus it is inert and will not cause any abnormal viscosity increase or other change in the rheological properties of the mud. The product is readily dispersible, requiring no special care when mixing into the fluid system. Packing:It is packaged in 50 kg or 25kg export paper bags. Big-bags and pallets are also available.
Description:Kar-Gal (Galena) is pulverized lead ore with a specific gravity of 6,5. Application:It is used for making very heavy drilling muds to overcome abnormally high pressures. It is also used to weight cement slurries. Packing: It is packed in 50 kg cloth or PE bags.
Description:It is ground ilmenite (iron titanate) with 4.58 g/cm3 density. Application: It is used for weighting the drilling fluids by using less volume of solids than with barite. Packing:25 or 50 kg paper bags.
Description: Kar-Fcl (Ferrochrome-Lignosulfonate) is sodium lignosulfonate. During the manufacturing process more calcium and sugar (both impurities) are removed than in most of the other competitive lignosulfonates on the market. This greatly enhances the effectiveness of Ferrochrome-Lignosulfonate and for this reason the product is in great demand. Applications: Ferrochrome-lignosulfonate is placed under the general classification of '"mud conditioning agent", in that it functions as a deflocculant and as a water control agent in water-base mud systems. Its secondary, but equally important contributions to the "conditioning" of the mud system is as an emulsifier of diesel oil, as an inhibitor against the swelling of expanding clays and as a corrosion inhibitor. It is an extremely effective mud thinner resistant to 250 oF(121oC). Recommended Treatment:For a "controlled" mud system a concentration of between 8.0 to 10 ppb (22.8 to 28.5 kg/m3) of Ferrochrome-Lignosulfonate is suggested. As a deflocculant for sea water mud, 4.0 to 6.0 ppb (11.4 to 17.1 kg/m3) is usually required and, as a deflocculant for fresh water mud systems a concentration of between 1.0 to 3.0 ppb (2.8 ton 8.5 kg/m3) is recommended. Ferrochrome-Lignosulfonate like all other drilling grade lignosulfonates, is acidic therefore, after each addition it is necessary to adjust the pH of the mud system to around 8.5 to 9.5. A pH within this range is important for the complete reaction of the product in the system. Packing:Kar-Fcl is packaged in 25kg export paper bags.
Description: It is a reddish brown powder of chrome-free lignosulfonate. Application:It is a chemical thinner, dispersant and it aids filtration control for water base fluids. Packing: It is packed in 25 or 50 kg paper bags.
Description:It is granular form, dry sodium tetraphosphate. Application:It is a polyphosphate mud thinner. It is an effective dispersing agent for clays; has little effect on pH of muds. Packing:25 or 50 kg paper bags.
Description:Kar-Pac is a polyanionic cellulosic long chain polymer used as a fluid loss control agent and viscosifier in salt mud. One ton of Kar-Pac will yield approximately 1500 barrels (or one metric ton will yield 262.9 m3) of 15 centipose mud in saturated salt water. The product is not subject to bacterial degradation. Application:Kar-Pac is stable at temperatures up to 300oF (148.9oC). Its primary application is as a filtrate control agent and as a supplementary viscosifier in salt water mud systems. The addition of Flosal in a concentration of 2.5 to 5.0 ppb (7 to 14 kg/m3) to the system will enhance the hole cleaning characteristics of Kar-Pac. Recommended Treatment:Kar-Pac, due to its extremely high viscosity yield, is an excellent product to use to formulate low solids drilling fluids in fresh water. To prepare a low solids fresh water drilling fluid, 0.5 to 1.0 ppb (1.4 to 2.85 kg/m3) is recommended. As a fluid loss control agent and viscosifier in salt water systems, 1.0 to 2.0 ppb (2.85 to 5.7 kg/m3) is suggested. Packing:Kar-Pac is packaged in 25 kg multi-wall bags.
Description:Kar-Pac is a polyanionic cellulosic long chain polymer used as a fluid loss control agent and viscosifier in salt mud. One ton of Kar-Pac will yield approximately 1500 barrels (or one metric ton will yield 262.9 m3) of 15 centipose mud in saturated salt water. The product is not subject to bacterial degradation. Application:Kar-Pac is stable at temperatures up to 300oF (148.9oC). Its primary application is as a filtrate control agent and as a supplementary viscosifier in salt water mud systems. The addition of Flosal in a concentration of 2.5 to 5.0 ppb (7 to 14 kg/m3) to the system will enhance the hole cleaning characteristics of Kar-Pac. Recommended Treatment:Kar-Pac, due to its extremely high viscosity yield, is an excellent product to use to formulate low solids drilling fluids in fresh water. To prepare a low solids fresh water drilling fluid, 0.5 to 1.0 ppb (1.4 to 2.85 kg/m3) is recommended. As a fluid loss control agent and viscosifier in salt water systems, 1.0 to 2.0 ppb (2.85 to 5.7 kg/m3) is suggested. Packing:Kar-Pac is packaged in 25 kg multi-wall bags.
|
|||||||||